Aeromodelling in Delhi India Workshops Nitro Cars Multirotors Quadcopters Helicopters Nitro Fuel
  • HPI RACING 1/10 BULLET MT 3.0 NITRO 4WD RTR with 5 Litre Nitro Fuel

    35,000.00 31,699.00

    HPI Racing 1/10 Bullet MT 3.0 Nitro 4WD RTR

    This is a radio controlled, glow powered, ready to run, 1/10 scale Bullet MT 3.0 Monster Truck from HPI.

    FEATURES
    -Chassis: 6061 aluminum 0.12" (3mm) thick double deck with front and rear skid plates and aluminum center brace
    -Drive: Four wheel sealed shaft drive
    -Radio: 2.4GHz with end point adjustments, dual rates, servo reverse, waterproof steering and throttle servos 
    -Throttle and Steering Servos: SF-10W Waterproof/ 4.5kg-cm6.0V (HPIM4105)
    -Engine: Nitro Star G3.0 with pull starter, two stage air filter with rain cover, two needle composite body slide valve carburetor, and ABC liner construction, "A"luminum  piston with "B"rass cylinder liner that is "C"hrome plated
    -Exhaust: Aluminum tuned pipe
    -Clutch: Two piece racing with 13 tooth steel clutch bell
    -Fuel Tank: 2.5oz (75cc)
    -Shocks: Eight oil-filled
    -Differentials: Bevel gear
    -Brake: Single drilled steel disc
    -Ball Bearings: Full set, rubber sealed
    -Body: Trimmed and painted
    -Suspension: Extra long arms with steel turnbuckle links Slipper Clutch: Dual pad, adjustable Spur Gear: 54 tooth plastic
    -Tires: All terrain 2.6" (67mm) wide, 4.8" (124mm) diameter
    -Wheels: Five Spoke black chrome finish, 14mm hex, 2.2" (56mm) wide 3.2" (82mm) diameter
    -Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
    -Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle

    INCLUDES
    -RTR HPI Bullet MT 3.0 Monster Truck with Engine, Exhaust, 2.4GHz
     Radio, painted Body and Instruction Manual, 5 Litre Nitro Fuel 16%

    REQUIREMENTS
    Fuel bottle, glow starter maintenance & track equipment

    SPECIFICATIONS
    Vehicle;
    Length: 16.4" (417mm)
    Width: 13.2" (336mm)
    Height: 6.3" (160mm) adjustable
    Wheelbase: 10.7" (272mm)
    Track: 10.3" (263mm) outer edges of tires side-to-side