Futaba T6K

UPDATED VERSION 2 OFFERS 8 CHANNELS OF CONTROL!

New in the 6K Version 2:

• Channels 7/8 are used through the R3006SB receiver's S.Bus/S.Bus2 ports
• Allow for expansions or adding accessories
• Can be assigned to any of the four switches or VR dial
• Are included in Sub Trims, End Points, Reverse, Failsafe, Servo Monitor and Trainer

Priority — five flight modes on four channels

• Channels 7/8 are used through the R3006SB receiver's S.Bus/S.Bus2 ports
• Matrix – nine flight modes on four channels

• S-FHSS/T-FHSS selectable
• Telemetry system (T-FHSS) sensors provide pertinent data on receiver battery voltage, external voltage, temperature, RPM, altitude and variometer
• S.Bus/S.Bus2 servo setting functions programmable through the transmitter
• 30 model memory
• Model naming up to 8 characters
• Programmable mixing for airplanes, helicopters, glider and multi-rotors
• Digital trims with variable step settings

• Switch/VR position change and AUX channel function change
• Throttle position warning
• Software is updateable through the CIU-2
• 128x64 DOT backlit LCD screen with adjustable display contrast
• Alarms can be preset to vibration mode
• Conveniently located Earphone/Trainer/S.Bus jacks
• Adjustable stick length and tension
• The R3006SB receiver can use S.Bus as the main link/communication to the servos or a combination of S.Bus and the conventional outputs together

System Features

• Airplane, Helicopter, Glider and Multicopter programming.
• S-FHSS/T-FHSS selectable.
• Telemetry system (T-FHSS) with data speech (via earphones) function for monitoring receiver battery voltage, external voltage, temperature, RPM, altitude and variometer, current, capacity and voltage.
• Built-in antenna (Full Range).
• S.Bus/S.Bus2 servo setting functions programmable through the transmitter.
• Preset vibration alarms.
• 30 model memory.
• 8-character model/user naming.
• Programmable mixes (3-normal, 1-curve) for airplanes, helicopters, gliders and multi-rotors.
• Digital trims with variable step settings.
• Adjustable stick length and tension.
• Changeable switch/VR position and AUX channel function.
• Throttle position warning.
• Backlit 128x64 DOT LCD screen with adjustable display contrast.
• Software updateable through the CIU-2 or CIU-3 interface units.
• Screen Lock.

• Assignable switches (three 3-position, one 2-position).
• Range Check.
• Program navigation bay with jog dial, +/- pads and end pad.
• Data reset.
• Model copy.
• Selectable model type.
• Fail Safe.
• End Points.
• Trim/Trim Resets/Trim Steps.
• Sub Trim.
• Servo Reversing.
• Parameter functions.
• Servo monitor/Test.
• Wireless model data transfer (to other T6K transmitters).
• Timer-System and Model (Up/Down/Down-Stop/THR Integrate) w/Vibration Alert.
• Trainer system.
• Power Saver.

Airplane Functions

• Wing Type (5-wing, 2-tail).
• Throttle Cut.
• Dual Rate/Expo.
• Throttle Curve.
• Idle down.
• Gyro.
• Aileron differential.
• V-Tail.
• Camber.
• Air Brake.
• Elevator-to-Flap mixing.
• Flap-to-Elevator mixing.
• Elevon mixing.

Helicopter Functions

• Swash type (6).
• Condition Select.
• Throttle Cut.
• Dual Rate/Expo.
• Trim Offset.
• Delay.
• Gyro mixing.
• Swash AFR.
• Swash mixing.
• Throttle Curve (5-point).
• Pitch Curve (5-point).
• Pitch-to-Rudder mixing.
• Throttle Hold.
• Hovering throttle.
• Hovering pitch.

Glider Functions

• Wing Type (5-Wing, 2-Tail).
• Condition select.
• Dual Rate/Expo.
• Motor switch.
• Gyro.
• Aileron Differential.
• V-tail.
• Butterfly mixing.
• Trim mixing.
• Elevator-to-Camber mixing.
• Camber mixing.
• Aileron-to-Camber mixing.

Multicopter Functions

• Flight Mode (Priority Flight Conditions and Matrix Flight Conditions).
• Center alarm.
• Dual Rate/Expo.
• Throttle Curve.
• Throttle Delay.
• Gyro.

Six Languages

• English.
• German.
• French.
• Spanish.
• Italian.
• Dutch.
• Tax extra as applicable.